This update contains the following changes and improvements:

◉ The new WSPR and APRS Mode Tools are now also available on iPhones (iOS 26 required)

◉ The Waveshare, Metropwr and Green Heron Tools can now also be used on iPhones

◉ Some DX-Cluster issues were fixed

◉ Multiple CAT Commands entered for the Command Bar can now be separated by a | character which will also add a small delay between commands

◉ A new Setting TX Off Delay setting was introduced

◉ Some FT8 Improvements

◉ Some accessibility improvements

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ SmartSDR+ Enhanced Signal Clarity (ESC) support added with interactive phase and gain control

◉ The SmartSDR+ CW Auto Tune feature was added to the Radio Panel

◉ Fixed an issue for the Aurora AU-520 where Diversity was not allowed

◉ Fixed some issues in the DX-Cluster Tool

◉ Fixed an issue where it was not possible to change the Antenna for the Diversity child slice

◉ For metroPWR, Waveshare and Green Heron it is now possible to toggle the Enabled state by hitting the enabled column in the list

◉ Accessibility improvements for the PTT button

◉ Adjusting the Spot font size now also adjusts the spacing

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A new WSPR Tool was added (iOS 26 and iPad required)

◉ Added support for the Green Heron RT-21 Rotator controller

◉ Fixed an issue with Flex-8400 Radios where Split mode can't be turned off again

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Radio information and warning messages will now be displayed

◉ The FT8 tool can now handle compound messages used in contests or by DX-Peditions

◉ Support for higher power of Aurora Radios

◉ Added Custom ADIF Fields for Class and ARRL_SECTION

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Some fixes for backward compatibility to older firmware versions 1 and 2

◉ A new APRS Tool has been added (iPad only, see the app manual for details on how to use it)

◉ An issue when changing Bands or Global Profiles was fixed

◉ The support button is now workig even if mail was not configured correct

◉ An issue on some devices when restoring the Tuning panel to the last location was fixed

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A new APRS Tool has been added (iPad only, see the app manual for details on how to use it)

◉ An issue when changing Bands or Global Profiles was fixed

◉ The support button is now workig even if mail was not configured correct

◉ An issue on some devices when restoring the Tuning panel to the last location was fixed

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ The Spot Font Size setting is now regarded

◉ For the Waveshare relay device, the possibility to flash a relay was added

◉ General improvements of the Waveshare and Metropwr Tools

◉ Firmware 4 License information can now be reviewed under the Radio Settings

◉ Firmware 4 Features like NRL, NRS, RNN, NRF, ANFL, ANFT were added under the DSP/OPT button on the Slice detail screen or the Radio Control panel

◉ Firmware 4 noise Floor Position slider feature was added to the left Disp Menu

◉ Note: The Radio needs to be licensed for the Firmware 4 features. If the license is missing, the features will not be displayed. Please see the FlexRadio documentation for more information about Radio Licensing

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Initial changes for upcoming Firmware Version 4

◉ Added a new Metropwr Tool for Power Meter and Rotator Control (see the App manual for details)

◉ Added a new Waveshare Tool — Waveshare devices can now send remote CAT commands to tuners, amplifiers, or antenna controllers. A relay device can also be used to remotely switch or power devices, including your radio

◉ Fixed some Dark Mode display issues

◉ When using mode tools such as FT8, the previous TX profile is now automatically restored after closing the tool

◉ Fixed some issued in the HF-Fax tool

◉ Some Logbook improvements

◉ Fixed an issue with the support button

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Initial changes for upcoming Firmware Version 4

◉ Added a new Metropwr Tool for Power Meter and Rotator Control (see the App manual for details)

◉ Added a new Waveshare Tool — Waveshare devices can now send remote CAT commands to tuners, amplifiers, or antenna controllers. A relay device can also be used to remotely switch or power devices, including your radio

◉ Fixed some Dark Mode display issues

◉ When using mode tools such as FT8, the previous TX profile is now automatically restored after closing the tool

◉ Fixed some issued in the HF-Fax tool

◉ Some Logbook improvements

◉ Fixed an issue with the support button

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A few issues caused by iOS 26 were addressed

◉ An issue with the repeater tone setting was fixed

◉ A Tune Stack, to store and recall the last visited frequencies has been introduced

◉ For SSTV it is now possible to add a Watermark Text to the Image

◉ S.A.T. Support was added including the following

◉ Integrated Rotator control

◉ Automatic doppler correction (no CAT or USB Cable needed)

◉ When logging QSOs, SAT Name, SAT Mode, Prop Mode will automatically be set

◉ The PL (CTCSS) setting for the selected transponder will be set in the Radio

◉ An issue that was causing CW Macros to get sent twice was fixed

◉ Some Logbook improvements

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A Tune Stack, to store and recall the last visited frequencies has been introduced

◉ For SSTV it is now possible to add a Watermark Text to the Image

◉ S.A.T. Support was added including the following

◉ Integrated Rotator control

◉ Automatic doppler correction (no CAT or USB Cable needed)

◉ When logging QSOs, SAT Name, SAT Mode, Prop Mode will automatically be set

◉ The PL (CTCSS) setting for the selected transponder will be set in the Radio

◉ An issue that was causing CW Macros to get sent twice was fixed

◉ Some Logbook improvements

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A crash when opening the HomeKit tool has been fixed

◉ A crash in the Network Stats tool has been fixed

◉ This update concentrates mainly on SSTV

◉ Added support for SSTV transmission. You can now transmit and receive picture over the air

◉ Automatic slant correction is faster and more accurate

◉ Manual image adjustment tools offer finer control

◉ Added FSK ID transmit and receive support

◉ Integrated QSO logging

◉ Progress bar shows real-time TX and RX status

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ A crash in the Network Stats tool has been fixed

◉ This update concentrates mainly on SSTV

◉ Added support for SSTV transmission. You can now transmit and receive picture over the air

◉ Automatic slant correction is faster and more accurate

◉ Manual image adjustment tools offer finer control

◉ Added FSK ID transmit and receive support

◉ Integrated QSO logging

◉ Progress bar shows real-time TX and RX status

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ This update adds an SSTV tool for receiving and displaying images from Slow-Scan TV (SSTV) signals. The ability to transmit SSTV is planned for a future update.

◉ Preparations for future FlexRadio types

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ This update adds an SSTV tool for receiving and displaying images from Slow-Scan TV (SSTV) signals. The ability to transmit SSTV is planned for a future update.

◉ Introduced a new Setting "Auto change Band for Frequency" which will automatically select the corresponding Band when selecting a frequency

◉ Preparations for future FlexRadio types

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Improved POTA Tool accuracy from KHz to Hz

◉ A space character left in the Logbook Search entry will now no longer show an empty logbook

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Fixed an issue where the waterfall stops when switching the Global Profile

◉ Fixed a crash when selecting the bottom row of the Radio Controls Panel

◉ Fixed an issue with POTA Spots

◉ Added support for Two Tone Tuning (firmware 3.9 required) under Settings and Transmit

◉ Under Settings and Spots, it is now possible to clear all FlexRadio spots of the connected Radio

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ iPad Only: A new Command Bar feature was added to start apps, send CAT commands or open Websites. Command Bar buttons can be displayed in a floating window and used along with keyboard shortcuts

◉ The click on spot feature to show call information in an open Call Lookup window now also works for FT8 Spots

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Now, if the Call Lookup Tool is open, clicking on Spots will display details about the call sign, including whether it has been worked before, along with distance and bearing

◉ Includes necessary changes to support new radio firmware and recent iOS versions

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Notable improvement in FT8 decoding with the introduction of multi-pass decoding

◉ Additional FT8 decoding improvement for weaker signals surrounded by big signals

◉ New Ultra Beam Tool added (iPad only)

◉ New CTR2-Dial Controller support added

◉ Fixed an issue with DST

◉ Fixed an issue when using Call-Sign Pre- or Suffixes in FT8

◉ Minimum requirement is now iOS 17

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Some bug fixes for the POTA tool

◉ Some additional PSK Reporter improvements

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ For the the 3-Antenna TGXL it is now also possible on iPhones to switch Antennas

◉ You can now perform a reverse search in PSK Reporter with an empty call sign, allowing you to discover other HAM operators currently active in a specific mode.

◉ Searches in PSK Reporter now include VARA and FREEDV modes.

◉ Added support for submitting WSJT-X decodes via UDP, enabling integration with tools like GridTracker.

◉ The PSK Reporter submission settings have been relocated from FT8 settings to the app settings for better organization.

◉ A new PSK Reporter submission Update Interval settings has been added

◉ Implemented some additional improvements and optimizations behind the scenes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Fixed some iOS compatibility issues

◉ Fixed issues on some iPad Mini devices

◉ Some additional minor fixes

Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Fixed a bug when importing ADIF files with wrong characters

◉ Fixed an issue when using a non-standard or prefix call sign in FT8

◉ Fixed a bug where AGC can no longer be changed in the right Radio Panel in some situations

◉ Fixed a bug when selecting a different logbook, the title was not updated

◉ New MIDI commands added for reverse frequency tuning

◉ New MIDI command to toggle SplitMode added

◉ Implemented several additional improvements and optimizations behind the scenes

Kindly use the 'CONTACT DEVELOPER' feature within the app under Settings for any issue reports.

I will ensure it is promptly resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE