Pipe Craftsmenv2.0.0

What changed

• PerformanceComplete rebuild of the app with a new engine and drawing system.
• ContentAdded grooved fittings reference including elbows, tees, and crosses from Victaulic tables.
• New featureIntroduced Tube Bending and Tube Bending Run tools for centerline marking and cut lengths.
• ContentAdded ASME B16.5 flanges (classes 150-2500) with built-in raised-face rules.
• ContentAdded threaded street elbows, plugs, and bushings drawn to scale.
• UXEnhanced Pipe Offset tools to display fitting names, pipe weights, and error handling for tight offsets.
• New featureNew Equal Spread tool to maintain parallel lines through turns.
• New featureNew Miter Joints tool for drawing flat cutting templates.
• UXUpdated calculator with Distance/Degrees modes, mode-aware memory, and a 45 multiplier.
• UXRedesigned Fitting Finder and grouped settings menu for improved navigation.

Original release notes

Version 2.0 is a complete rebuild - new engine, new drawings, new tools - keeping every number you have been working to.
- Grooved fittings join the reference: elbows, tees and crosses from the Victaulic tables, and the groove specification itself - gasket seat, width, diameter, and the lightest wall that may be roll or cut grooved
- Two tools for tube: Tube Bending turns a drawing's centerline into the four lines you actually mark, and Tube Bending Run does it for a whole run at once, answering the first question first - the length of tube to cut
- Flanges: all six kinds, ASME B16.5, classes 150-2500, with the raised-face rule built in
- Threaded completes: street elbows, plugs and bushings, drawn to scale with the takeoff dimensioned on the steel
- Pipe Offset and Rolled Offset now name the fitting each end needs, the pipe between and its weight - and say so plainly when an offset is too tight to build instead of printing a negative cut length
- New tool - Equal Spread: the advance that keeps parallel lines parallel through a turn
- Miter Joints draws the blank flat on the bench, marked for cutting
- The calculator has Distance and Degrees modes, mode-aware memory, and the 45 multiplier
- The Fitting Finder opens on the size and connection you work in, keeps a shelf of what you starred, and opens a fitting's whole set of numbers with one tap
- Settings are grouped now - display, your defaults, fit-up and account - instead of one long scroll
- Every shipped dimension audited against the previous release: 9,443 figures, zero mismatches