• Added new MUTE GROUPS control panel, accessed by MUTES button in top right of GUI, allowing remote activation of the 4 or 8 Mute Group Master console buttons from the iPad. (Requires Si software V2.2.1 or higher and Vi software 6.4.5.340 or higher).

• Improvements to the setup workflow for the USER fader tab: This now includes a drag & drop setup UI, allowing easier selection and addition of channels to the tab, re-ordering or deletion using drag & drop, and the ability to copy the complete INPUTS tab contents to the USER tab, which can then be edited to remove or re-order channels.

• Channel names are now displayed in the USER tab Setup list.

• Leaving the Bus Select page by pressing the LRC button now returns to the USER Inputs tab if it was previously selected.

• Fixed an issue with text readability in Dark Mode.

• Added new USER tab which allows creation of customised input fader page within the app.
• Allow USER tab to be used in conjunction with the Contrib tab to allow customised view of bus contributions.

• Improved reliability of iPad network interface selection within the app.

App is now compatible with iOS 18

Bug fixes for compatibility with iOS 12 & 13 (Pan bug fixed affecting Vi consoles only, added location services accept/reject in order to display WiFi SSID in app)

Soundcraft ViSi Remote 3.5.1 is an iOS application that allows remote control of Soundcraft Vi, Si Compact, Si Performer, Si Expression and Si Impact mixing consoles wirelessly from your iPad device using no additional hardware other than a wireless access router connected to the Harman HiQnet® Ethernet port of the console.

With ViSi Remote you are free to roam your venue and adjust mixes and other audio parameters directly from the iPad.

What's new in V3.5.1?
With version 3.5.1 comes the addition of support for the new Soundcraft Vi1000 console, plus various bug fixes:
Input Trim control has now been implemented for Vi consoles, Matrix contributions now show the correct faderglow color on Vi consoles, compressor, and gate graphs have a correct scale on Vi consoles. Vi200 now supported. Phase button now implemented for Si consoles.

What's new in V3.4.3?
With version 3.4.3 comes the addition of 80 mix channel control for the Soundcraft Si Impact 2.0 firmware's 80 real time mix channel capabilities.

What's new in V3.4?
With version 3.4 comes the addition of channel and bus processing control and metering within the app for Vi console types Vi1, 2, 4 & 6. Control input gain, pan, routing, delay, filters, EQ and dynamics and see channel and bus level meters and dynamics gain reduction metering within the processing control section, and use the Meters tab to see all console meters at a glance and jump quickly to any block of 8 channels or busses.
All Vi console types now include metering and full channel & bus processing control.
(Metering & processing control requires console software version 4.9 on Vi1, 2, 4 & 6, and V6.3 or later for Vix00 and x000 consoles).

With version 3.4 comes the addition of channel and bus processing control and metering within the app for Vi console types Vi1, 2, 4 & 6. Control input gain, pan, routing, delay, filters, EQ and dynamics and see channel and bus level meters and dynamics gain reduction metering within the processing control section, and use the Meters tab to see all console meters at a glance and jump quickly to any block of 8 channels or busses.
All Vi console types now include metering and full channel & bus processing control.
(Metering & processing control requires console software version 4.9 on Vi1, 2, 4 & 6, and V6.3 or later for Vix00 and x000 consoles).

With version 3.3 comes the addition of metering within the app for Vi console types Vi2000, 3000, 5000, 7000,  plus CPU-upgraded consoles Vi200, 400 and 600. See channel and bus level meters and dynamics gain reduction metering within the processing control section, and use the Meters tab to see all console meters at a glance
and jump quickly to any block of 8 channels or busses.
All of the above console types now include metering and full channel & bus processing control
(metering requires console software version 6.3 or later, channel processing requires console software version 6.1 or later).

With version 3.2 comes the addition of support for the recently released new consoles types Vi2000, Vi200, 400 and 600

Support for Vi3000 channel and bus processing.

- Support for Vi5000 & 7000 including channel processing

- Support for Si Impact

• Gain and 48V control
• Channel/Bus Metering
• Gate & Compressor Graphs
• Meters Page with Fader Jump
* Requires Si Expression 1.6, Si Compact 3.1, Si Performer 1.6 or higher

https://www.youtube.com/watch?v=-248Wv-hcz0

• Si Performer 1 support
• Improved connectivity
• Fixed +15dB jump EQ issue on iPad Air

• Si Performer 1 support
• Improved connectivity

Soundcraft ViSi Remote 2.0 is an iOS application that allows remote control of Soundcraft Vi*, Si Compact, Si Performer and Si Expression mixing consoles wirelessly from your iPad device using no additional hardware other than a wireless access router connected to the Harman HiQnet® Ethernet port of the console.
With ViSi Remote you are free to roam your venue and adjust mixes and other audio parameters directly from the iPad!
With 2.0 comes the ability for Si Compact, Performer and Expression users to adjust channel strip settings per channel including settings such as Gate, Compressor and EQ along with Pan, LR/Mono routing and phase invert switches. This functionality will be added to Vi consoles in a future update.

Applications:
• Optimise the front of house mix from anywhere in the room
• Adjust monitor levels while standing next to the artist
• Adjust channel strip settings remote from the console
• Use to extend the fader count of an existing control surface
• Use in standalone mode for familiarisation with console functions
• Control a network of consoles (e.g. FOH and Monitor)
• Provide a separate surface for DMX functionality (Si Performer only)
• Allow multiple users on the same console to control their own mixes

ViSi Remote 2.0 Console Software Requirements:
(Latest software available on the Soundcraft website)
ViSi Remote 2.0	Si Performer 	1.5	build
				Si Expression 	1.5	build
				Si Compact	3.0	build
				Vi Series*		4.6 or higher
Note: The Latest software listed above is needed in order to access the ACS settings of the console. Older software versions would result in no added control benefit from ViSi 1.2.4.
 *Vi series consoles will work with ViSi V2.0 but have the same functionality as V1.2.4. Connection reliability has improved in ViSi 2.0 however there are no other new features for Vi Users.
ViSi Remote 2.0 iOS Compatibility:
(latest software available from apple)
ViSi Remote 2.0					iOS 6 or higher
Note: iPad 1 devices are not compatible with iOS 6 and cannot use the ViSi 2.0 Remote App. ViSi 1.2.4 is still available for iPad 1 users wishing to use the ViSi Remote App.

Functions controlled:
• Channel naming
• Input faders and mutes
• Bus, master LR and VCA master faders and mutes
• ACS Settings include:
        HPF
        Channel EQ with grabable parametric EQ curve
        Gate and Compression settings
        Pan
        Output Delay
        LR and Mono routing
        Phase Invert
• Graphic EQs on all bus outs
• Channel contributions to each Aux Mix
• Channel contributions to each FX bus
• Mix contributions to each matrix bus
• DMX Masters (Si Performer Only)

What’s New in Version 2.0*:
• ACS settings:
        HPF
        Channel EQ with grabable parametric EQ curve
        Gate and Compression settings
        Pan
        Output Delay
        LR and Mono routing
        Phase Invert
• ACS indicators:
        Isolate
        Stereo channel indicator
        LCR panning
• Mixing to an FX bus

* Requires Si Expression 1.5, Si Compact 3, Si Performer 1.5 or higher

Support for Si Expression
Setting console channel names from the iPad (Not Si Compact)

Added string (name) support for Si Compact
Added support for Si Performer
Added support for Vi4 96 input channels
Improved navigation around SENDS pop-up window
Improved navigation when switching between tabs

NOTE: See ViSi web page for details of host console software requirements

This version adds compatibility with Soundcraft Vi-Series consoles. Please note! Software upgrade to version 4.6 is required on the Vi console in order to communicate with the app (visit http://www.soundcraft.com/downloads/software_login.aspx with a Mac or PC to download the V4.6 console software).

Improved discovery of consoles and reconnect following network dropout. The wireless network used by the iPad is shown in the devices view in place of the number of off-line / on-line devices.

Bug fixes.